POSITION ENTRY FROM A TH-D7 HT                            24 Jan 2008
---------------------------------------------------------------------
                                                               WB4APR

Here are the LAT/LONG coordinates for the Klondike Derby at Kinder 
Farm park.  A map has been provided with a lat long grid.  You should
be able to estimate your position just by looking at that map.

But here is a direct entry method for the planned station positions.

Notice that they all have the same DEGREES and most of them have the
same MINUTES.  So all you need to change as you move around, is to 
dial a few clicks in the hundredths of Minutes.

BS-1  N39 06.07 W76 34.89
BS-2  N39 06.14 W76 34.90
BS-3  N39 06.19 W76 34.98
BS-4  N39 06.27 W76 35.07
BS-5  N39 06.26 W76 35.15
BS-6  N39 06.24 W76 35.27
BS-7  N39 06.13 W76 35.24
BS-8  N39 06.14 W76 35.05

CS-1  N39 05.98 W76 35.13
CS-2  N39 05.96 W76 35.23
CS-3  N39 05.99 W76 35.32
CS-4  N39 06.09 W76 35.27
CS-5  N39 06.10 W76 35.23
CS-6  N39 06.13 W76 35.23
CS-7  N39 06.17 W76 35.13
CS-8  N39 06.16 W76 35.07

HQ    N39 06.10 W76 35.00
PARK  N39 05.98 W76 34.83

To enter your position, just push the POS button.  There are 3 
positions stored.  Select the one with the (*), since it is the
one that is being used.  Then use the OK joy stick to select
the digit to change, and then up/dn or use the knob to dial
in the new position.  Keep hitting OK to the end.  Then your
new posit is finished.

Toggle the BCON button off/then/on to force a new transmission.
Your Automatic Position rate should be set to about 10 minutes.

Bob, WB4APR